Skip to content

Full-Area and Platform-Scale 3D Geomechanical Modeling for Well and Platform Placement Optimization

Nov 2026 · ADIPEC · 0 citations · 11 references

Abstract

The unconventional reservoir commenced production in 2014 in China. For assuring its engineering efficiency and development benefit, it is critical to accurately understand the geomechanics law and its application in various scales. Accordingly, 3D geomechanics and geology models were built in the scales of the whole study area and the platform. These models are high-resolution models based on structure, geology, attributes and multi-scale natural fractures. Core, well logging and seismic data were used to finely describe the mechanical parameters, and a set of methods for establishing 3D pore pressure model for shale gas field was established. Advanced finite element simulator and large-scale parallel computing technology were applied to establish 3D stress field models with different planar resolutions for the whole study area and the platform. In order to accurately characterize the vertical heterogeneity of shale, the models are designed with a resolution of 0.5 m thick in target layers. Various data were utilized for quality control and calibration of these models, and new data were timely used to continually update these models. The accuracies of these models can reflect the direction, size, heterogeneity and anisotropy of the stress. The results show that in-situ stresses vary greatly at platforms, between wells and along the horizontal well sections. Such complex variations are the consequent reflections of rock textures (e.g. structural form, and multi-scale fracture system) and rock composition in various scales. These geomechanics models can meet various requirements for scale and accuracy in different applications in either the whole study area or any single well. The whole-area model can be used to optimize platform location and well location deployment, to evaluate the geologic storage capacity and resources, and to assess the mechanical stability of faults and fractured belts. The high-resolution platform model can be applied in analyzing borehole stability, managing drilling in real-time manner, optimizing fracturing design, and making post-frac comprehensive evaluation. These geomechanics models have been successfully integrated in the practices of geology-engineering integration. By iterative updating and in-time application, they facilitate the engineering efficiency and development benefits. The establishment of large-scale geomechanics models for development of shale gas fields, recording the first time in China, provides references for future operations.

View source

Similar papers

Nov 2026

Field Application of 3D MEM to Mitigate Overpressure Hazards and Enhance Well Performance Efficiency

Exploration focus is moving into the Ultra-Deep resources due to the ever-increasing energy demand of China. Overpressure and wellbore instability related problems in such setting are mainly associated with narrow drilling margin resulting in severe well control incidents and increased drilling cost. In order to redu...

Yi-Huo Xing, Qing-Dong Liu, Li-Hong Wang et al. · 0 citations
Sep 2026

Enhancing Horizontal Wells Production Efficiency Using Multi-Scale Geomechanics and Fracture Flow Model in Unconventional Resources

The Yingxiongling shale oil play has achieved breakthrough progress, with the predicted Estimated Ultimate Recovery (EUR) of Well Chaiping-1 exceeding 40,000 tons, indicating significant development potential. However, challenges such as "great thickness, unclear sweet spot enrichment patterns, strong heterogeneity,...

Yong Liu, Hao-Yan Jiang, Jian-Xuan Yang et al. · 0 citations
Sep 2026

2D and 3D Geomechanical Numerical Simulation for Evaluating Well-Stability and Reservoir Consolidation during the Production from the HYDRATE P1 Well on the Alaska North Slope

Methane hydrate production via depressurization can induce geomechanical changes in hydrate-bearing sediments, thereby impacting production performance and risking subsidence and wellbore instability. Here, a fully coupled thermo-hydro-mechanical simulator (COTHMA) is applied to evaluate well stability and to underst...

Nanami Sakamoto, Ryo Morishige, Katsushi Aoi et al. · 4 citations
Open access Oct 2026

3D simulation of longwall-gateroad interaction in close coal seams

Purpose. To establish the regularities governing the evolution of the stress–strain state of a rock mass during mining operations in closely spaced coal seams with weak surrounding rocks, typical of the Western Donbas conditions, taking into account the spatial and temporal interaction between longwall faces and develo...

O. Sdvyzhkova, D. Babets, A. Y. Perepelytsia et al. · 0 citations
Conference Open access 2026

Evaluation of Multi-shape Geogrids for Base Stabilization in Flexible Pavements

A full-scale test section was constructed to evaluate the performance of newly-developed multi- shape geogrids for base course stabilization in flexible pavements. The test section included one unstabilized test item and three geogrid stabilized test items. The geogrids were manufactured from either monolithic or coext...

W. Robinson, Prajwol Tamrakar, M. Wayne · 1 citation
Nov 2026

Numerical Simulation of Complex Fracture Propagation Considering Production-Induced 4d Geomechanics Variation

Unconventional reservoirs are commonly characterized by well-developed natural fractures, pronounced heterogeneity, and anisotropy. Long-term production continuously alters reservoir geomechanical conditions, resulting in substantial differences in complex hydraulic-fracture propagation between infill and parent well...

Wen Hou, Qin Hu, Dong Zhao et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.