The developed system is capable of providing real-time electrical energy monitoring with adequate accuracy and easy accessibility for users.
Abstract
This study aims to develop an Internet of Things (IoT)-based electrical energy (kWh) monitoring system using an ESP32 microcontroller integrated with a web monitoring platform. The system employs ACS712 current and ZMPT101B voltage sensors to measure voltage, current, power, and electrical energy in real time. The research method used is Research and Development (R&D) with the 4D model, consisting of define, design, development, and dissemination stages. The test results indicate that the ZMPT101B sensor has an error rate of 0.49%–0.81%, while the ACS712 sensor has an error rate of 4.0%–14.2%. Measurement data were successfully transmitted and displayed on the monitoring website through an internet connection. The developed system is capable of providing real-time electrical energy monitoring with adequate accuracy and easy accessibility for users.
Indonesia's rising residential electricity consumption and the passive nature of conventional electrical terminals create risks of energy waste, overload, and fire hazards, since existing terminals offer no monitoring or remote-control capability. This research aimed to design and implement Smartura, an IoT-based smart...
Chika Hayya Sabillah· Journal of Applied Science,...· 0 citations
The designed system successfully improved installation safety and reduced the risk of equipment damage and fire and was developed using an ESP32 microcontroller integrated with a PZEM-004T sensor, a DHT22 sensor, and an MQ-2 sensor.
I. M. D. P. Putra, Nardi Nardi, Dibyo Susanto et al.· Internet of Things and Artif...· 0 citations
The design and experimental assessment of a portable electrical measurement platform that uses Internet of Things (IoT) technology for continuous measurement and remote observation and its suitability for electrical engineering measurement and system analysis is reported.
S. Haryudo, Widi Ariwibowo, Ervin Yohanes et al.· E3S Web of Conferences· 0 citations
In an era of rising energy costs and environmental concerns, traditional monthly electricity bills fail to provide households with the real-time insights needed to optimize their energy usage. To address this gap, this project details the development of a House Energy Monitoring System (HEMS) designed to continuously a...
W. Bukhari· International journal of res...· 0 citations
The article addresses the problem of monitoring and control of electrical energy consumption using Internet of Things technologies. A conceptual architecture of an automated system integrating electrical parameter measurement devices, microcontroller-based control, wireless communication technologies, cloud services, a...
О. А. Повшенко, Bohdan Lishchyna, O. Pazdrii· Electronics and Control Syst...· 0 citations
Three-phase induction motors are essential in industrial systems and require continuous condition monitoring to improve operational reliability and reduce unexpected downtime. However, many Internets of Things (IoT)-based monitoring systems focus on data acquisition without quantitatively validating communication perfo...
Nandar Nandar, A. Fadlil, Tole Sutikno· Journal of Electrical Engine...· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.
